2021 BASE-CAMP Soft-Wall Cabin

Starting @$155,000 USD / $190,650 CAD plus Chassis

The BASE CAMP bridges the gap between our CAMP-HBE  camper and our SUMMIT cabin. The BASE CAMP utilizes 1.5″ (38mm) composite panel(s) to aid in achieving the weight that we are targeting.  Coupled with our pop up roof system using our insulated soft wall technology, not only helps in weight reduction it also reduces the overall height of the cabin.

The BASE-CAMP is a fixed cabin designed specifically for 1 ton trucks with either a 6.5 foot or 8 foot bed. These cabins use our proprietary composite panel and aluminum extrusion system to keep weight extremely light, extremely tough, and you extremely warm or cool!

The extrusions are designed specifically for this application,  the thermal transfer has been almost eliminated keeping the interior more comfortable in inclement weather. 

 

  • External Dimensions: 168″ L x 78″ W x 64″ H closed / 89″ H open
  • Internal Dimensions: 165″ L x 74.5 “W x 61″ H closed / 82” open
  • OPEV gen 4 composite walls & roof = 1.5″ (38.1mm) (>=R8)
  • 1.5″ (38.1mm) honeycomb poly propylene floor
  • Dry weight ~1985 lbc (*TBC)
  • Exterior
  • OEV automatic roof lift system with manual override
  • Cabin fixed to chassis – fully isolated
  • Under cabin powder coated aluminum locking cabinets – keyed the same
  • OEV Rub Rail with integrated DOT LED lighting and mounting for solar panels
  • (2) -Dual  pane acrylic window with roll up screen on each side of dinette
  • (2) -Dual pane acrylic window with roll up screen on each side of upper queen bed
  • Fire rated & insulated soft walls (>=R4)
  • RV Entry door with window and screen door
  • Bomar Roof hatch 
  • Over cab bed with 4”  med density foam queen size mattress
  • Base Camp graphics package
  • Snap on vinyl window cover for entry door
  • Integrated Awning mounts
  • Powder coated aluminum extrusions / exoskeleton
  • Interior:
  • 51” wide c shaped dinette – folds down into bed
  • Marine fabrics for all cushions
  • 4” medium density foam cushions
  • High traffic grade Lonseal vinyl flooring
  • Powder coated aluminum interior cabinetry
  • Starboard door and drawer fronts
  • Fire extinguisher 10ABC
  • Smoke/CO detector
  • (1) Multi speed roof vent
  • 35 gal fresh water tank w/12v pump
  • 15 gal gray water tank (tbc)
  • Sagiva  inside & outside shower
  • Dry bath w/built in Thetford C400 series cassette toilet
  • S/S sink w/flush mount glass top
  • OEV diesel hydronic system
  • Webasto Airtop 2000 diesel cabin heater
  • (2)-180W roof mounted solar panel
  • 2000W Xantrex XC Pro Pure Sign Inverter (with charger) – engineered to activate the BMS in the event of a depleted battery
  • AC wiring package – includes (2)- 110V outlets
  • (1)-lithionics UL listed 315Ah LiFePO4 battery w/internal BMS, remote on/off and built in heater
  • Amp seal harness, state of charge display, sterling dc/dc charger, Victron 100/30 mppt solar controller
  • 164L DC compressor novakool fridge/freezer
  • Double burner induction cooktop
  • LED side and rear flood light
  • LED interior dimmable lighting
  • Additional 180w solar panel
  • Additional Lithioncs 315Ah Power system LiFeP04 battery- UL listed Internal BMS, remote control on/off switch and heater
  • Cruise N Comfort CNCUSAHD12L Split system -7000 BTU
  • Additional 10 Speed Maxxair fan with blind and LED light
  • Bunk bed above dinette -includes mattress
  • Rear tire carrier manual lift
  • Hydra lift rear carrier installed
  • Back-up camera with housing – plugs into factory harness if equipped
  • OEV roof rack – Powder coated Aluminum
  • Exterior front offroad light bar – includes mounting locations for (4) 5″ round/rectangle/square LED lights (lights not included)
  • (4) – Baja designs  LP-6 lights for the optional front light bar – floods
  • Pass through to cab – includes vinyl snap in door/cover
  • OEV Molle rack